term 4 week 5 last blog

hello blog for the last time once agent i came in on Saturday and got the light 100 percent done then wot i did was i put more glue on the circuit and dilled out the holes then i used self taping screws to put the bottom plate on i all so put some silicon on to help keep the water out i all so glued the wire to the side and then i put the top on and drilled out the holes and put in the self taping screws then i glued the solar panel on then it was all done then the over time i have been the over time writing my evaluation

term 4 week 4

hello blog how are you doing today time is running out fast a lot needs to get done once again i came in on saturday 12-4pm i had to get my big circuit going 1st i had to take out the LEDs and solder to bits wire on then i put more wire on the LDR then add heatshrink on then i added on the battery holder then a put the wires for the solar panel then on tuesday i put the batteries in the holder then glued all the circuit then it was time to go on the over day at lunch time i cut out a bit of aluminium then i screwed it to the box then today i am typing this and adding pics i am all so going to come in the weekend

term 4 week 3

hello blog time is moving fast once again me in on Saturday i ended up getting all the acrylic on then i got the circuit as the PCB brooking was cover in hot glue so i had to take it off but when when i was taking of the glue i broke some of the parts so i had to take them off and put two new parts on witch i did then i cut a bigger opening in the box and filed down then on Tuesday i filed down the box more then i went down to jaycar and got a battery Holder then we all had to go home on Friday i would like to get the circuit all done

Michael

term 4 week2

hello blog lots has been done in the last week I ended up coming in on Saturday for 2 hours I drilled the holes for the screws and put them in than we worked out what light I should uses then I had to go to jaycar and get it but we could not find the right fitting at school so it was back to jaycar then I put the hole to bolt it down and put the wire through after that it was time to go home on Tuesday I put two bits of wire on the light holder then I bolted it to my box today I am writing or should I say typing this. I have also done my calendar. On Friday I would like to rivet all the plastic on and put the top on.

term 4 week1

hello blog today i have done my calendar for the last 3 weeks i have all so edited my blog and put the blogs in the right order i have all so done my holiday blog on wensday we maybe doing practical i would like to get a lot down on friday i hope to get a lot done i would like to get all the acrylic on the sides of the box

holidays

in the holidays i did not end up doing a lot i ended up going sailing when the wind was not blowing only looked at the blog one time but i did not edit it i all so did a lot of time wasting and sleeping i all so did some work on the scooter and now gos faster i all so put some more paint on the boat

term3 week 10

hello blog i have been told not to say this.. on firday we only had one period of dtm as we had to go on a walk i ended up puting my brackets i put in most of the rivetss on tursady we had to do oragamy wich sucks but it was bettetr than paperwork today we are bloging and we may do some work on firday we only have 1/2 a day

term3 week 9

hello blog on Tuesday I drilled out the holes for my brackets and put them on I only ended up putting one on as I run out of time it was slow going one thing which did not help was the fact I had to cut down the rivets I used as that were far too long today I have done my calendar and I am writing my blog on Friday we only had 1/2 the time as in period 3 we have to go on a walk for some play people say is not that good

term3 week 8

this week not a lot got done as we had the week of as study week but i ended up comeing in after my exam i cut out three squares for my box and made one of my brackets for my boxs picers can be seen on my blog

term3 week 7

hello blog on Friday i finally cut out my 1st net it was slow going and i had to use a coping saw then i had to file the edges nice then i had to cut out the center so i had to drill lots of holes next to each over then i used a flite head screwdriver and hammer to knock out the had to move parts then i had to file the side nice then i marked out the side then on Tuesday i started cuting it out today i am witting this f-ing blog on Friday i am away sailing

term3 week 6

hello blog on Friday we had a doable practical i was working on cutting out my net for my box the net I'm working on now is for the bottom i had to slowly cut it out using a coping saw it was slow going but in the end i did it i cut it out you can see picter of this on my blog on Tuesday we got a new chak list witch i have just about done i need to do so fixing up of my blog sometime today i am witting and or typing then i will add more picter

term3 week 5

hello blog on Friday i spend a lone time working out how i was going to make my box come to life after sometime i worked it out then we had lunch after lunch we got start back to work i had to get a big sheet of aluminium and marked out a piece to cut of then with Jamie help i cut the piece of using the big cuter then i cut the piece i cut of up more then it was pack up time this week started of slow on Tuesday i gout out my mock up and aluminium and marked out lines to cut and bend i used a pare of odd leg calipers to make the line picture can be seen on blog today i have done my calendar and i am typing up this blog then i will add some pic's

term3 week 4

hello blog last Friday i was away sick probably because i went sailing the night before on Tuesday. we had to fix up our labels today i an writing/ typing this blog wich i hate doing as we are doing practical i may cut out a net for my box one problem is the net is to big to fix on the cam machine ......... so cos of that in not going to use it




michael

term3 week 3

hello blog this last week went fast on Tuesday we had practical i was working on my mock up i have found that some parts of my box may not fix on the bed of the cam machine as their is a big top and bottom plate which fold up my box is all so going to be bigger than i would have liked it to have been today i am witting this i have all so done my calendar on Google you can see my calendar on my blog on Friday i will work on my mock up box and i may even start make it out off aluminium

term3 week 2

on Tuesday i made a mock up off my final design i had to do some modification to make the battery fix in the box now my box is big so then i did some modification as the box was to high now it is lower today i an bloging i may do some solidworks wich should be difficult as i dont know how to use it on firday we are doing doble practical i am going to work on my final design and my mock up

term3 week 1

hello blog this week is the 1st week back from the school holidays on Monday. I did a peer assessment i had to look at kody's final design and wirte a comment he all so gave me a comment we all so got a new check list so today i am going to do the check list and i have all so bloged as i am doing now i have all so done my calendar on firday i am going to do some practical i may make a moke up

term1 week 9

term1 week 4

term1 week 5

term1 week 6